data sheet doc. no : qw0905- rev. : date : 04 - mar.- 2009 b leg42292/s10-pf-0808 dual color led lamps leg42292/s10-pf lead-free parts pb ligitek electronics co.,ltd. property of ligitek only l dcc
1.cathode red 2.common anode 3.cathode green 1 3 2 note : 1.all dimension are in millimeter tolerance is leg42292/s10-pf part no. 9.5
leg42292/s10-pf note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance. green gap white diffused 30 5651.2 2.6 1.71.870 luminous intensity @ ma(mcd) part no spectral halfwidth !" nm peak wave length " pnm forward voltage @20ma(v) emitted orange gaasp/gap lens material color min. 635452.6 1.70.5 max.min. 10 typical electrical & optical characteristics (ta=25 # ) viewing angle 2 $ 1/2 (deg) 70 1.2 typ. 80 50 peak forward current duty 1/10@10khz i fp operating temperature power dissipation reverse current @5v storage temperature tstg t opr -40 ~ +100 -40 ~ +85 pd ir 50 50 10 absolute maximum ratings at ta=25 # forward current parameter symbol i f 1515 orangegreen ratings ma # # mw % a unit ma ligitek electronics co.,ltd. property of ligitek only part no. leg42292/s10-pf page 2/6
3/6 page e chip 750 700 650 1.0 0.5 0.0 600 550 ligitek electronics co.,ltd. property of ligitek only r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a fig.2 relative intensity vs. forward current forward current(ma) f o r w a r d c u r r e n t ( m a ) fig.1 forward current vs. forward voltage forward voltage(v) typical electro-optical characteristics curve r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 # ambient temperature( # ) fig.4 relative intensity vs. temperature f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 # wavelength (nm) r e l a t i v e i n t e n s i t y @ 2 0 m a ambient temperature( # ) fig.5 relative intensity vs. wavelength fig.3 forward voltage vs. temperature leg42292/s10-pf part no.
ligitek electronics co.,ltd. property of ligitek only r e l a t i v e i n t e n s i t y n o r m a l i z e @ 2 0 m a typical electro-optical characteristics curve r e l a t i v e i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 # r e l a t i v e i n t e n s i t y @ 2 0 m a wavelength (nm) 500 0.0 600 550650 0.5 f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 # fig.5 relative intensity vs. wavelength 1.0 ambient temperature( # ) fig.3 forward voltage vs. temperature f o r w a r d c u r r e n t ( m a ) forward voltage(v) fig.1 forward current vs. forward voltage g chip ambient temperature( # ) fig.4 relative intensity vs. temperature 4/6 page forward current(ma) fig.2 relative intensity vs. forward current leg42292/s10-pf part no.
60 seconds max note: 1.wave solder should not be made more than one time. 2.you can just only select one of the soldering conditions as above. 0 & 0 preheat 50 100 2 ! /sec max 120 & 25 & 260 & temp( ! c) 5 ! /sec max 260 ! c3sec max time(sec) 150 dip soldering preheat: 120 ! c max preheat time: 60seconds max ramp-up 2 ! c/sec(max) ramp-down:-5 ! c/sec(max) solder bath:260 ! c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 2.wave soldering profile ligitek electronics co.,ltd. property of ligitek only soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 ! c max soldering time:3 seconds max(one time) distance:2mm min(from solder joint to body) part no. leg42292/s10-pf page 5/6
1.ta=-40
|
